Sensaphone 800 - Manual (Page 44)

Sensaphone
®
Model 800 User’s Manual
42
To program the Voice Message for a Zone:
2. Press the SET key.
SET
2. Press the MESSAGE key. The 800 will say, “Enter Message
Number.”
MESSAGE
3. Press the number key for the corresponding Zone.
4
MAX CALLS
5
TEMP LIMITS
6
CALIBRATE
8
CLOCK
3
INTERCALL
TIME
7
RECOGNITION
TIME
9
LISTEN TIME
SOUND
0
ID NUMBER
POWER
1
CALL
DELAY
2
VOICE
REPS
4. When the unit beeps, begin speaking your message into the
microphone. The unit will say “OK,” when the recording
time has elapsed; then it will play back your recorded
message. You can shorten the message length by pressing
the ENTER key after speaking your message.
To play back the message for a Zone:
1. Press the WHAT IS key.
WHAT
IS
2. Press the MESSAGE key.
MESSAGE