SPYPOINT SMART-8 User Manual - Manual (Page 6)

6
Components
1 Photo lens Image sensor and infrared filter.
2 Fresnel lens Expands the detection area and increases the
sensitivity of the camera’s motion sensor.
3 Configuration screen To see battery level, date, time, number of
recorded files, error messages and program-
ming options (p.9).
4 Test light Flashes in TEST mode when there is detec-
tion and flashes 60 seconds in PHOTO/VIDEO
mode to allow the user to leave without being
photographed or recorded.
5 Light sensor Allows the lighting of the LEDs panel at night.
6 OK button Allows the user to select an option.
7 ON/OFF button Press the button to turn on or off the camera.
8 Touch wheel Touch control interface for navigating through
the menus (p.9).
9 Invisibles LEDs Night lighting to obtain black and white pho-
tos and videos.
10 Access to the time
battery (located
inside the battery
case)
Battery that keeps the time and date in
memory (p.7).
11 Battery case Case for AA batteries or a rechargeable
lithium battery pack (p.7).
12 Cable lock hole Allows the user to install a CL-6FT cable lock,
sold separately (p.17).
13 Mounting bracket Removable support to install the camera
(p.8).
14 Slot for installation
strap
Allows the user to install the camera using
the installation strap included (p.9).
15 Tripod mount Standard ¼-20" tripod mount.
16 12V power jack This camera can be powered from an external
12-volt DC input such as a 12V battery or a
12V adapter, sold separately (p.16).
17 SD card slot An SD card is required to record photos/
videos (p.8).