Stack-On GC-500-5 4472-0707 - Manual (Page 2)

INSTALLATION OF GC-500-5 PISTOL-AMMO CABINET ON TOP OF
SECURITY CABINET
NOTE: We recommend that security cabinet be installed as described above.
IMPORTANT: Install the shelf before mounting the cabinet to a wall.
Remove the top hole plugs from the cabinet by pushing out from the inside of the cabinet.
Place the GC-500-5 on top and assemble with (2) 1/4-20 nuts and bolts. Do not tighten
bolts. (See figure 5)
Drill (4) 3/16" pilot holes into the wall studs and secure the GC-500-5 cabinet to the wall
using (2) lag bolts and washers. (See figure 5)
Tighten the (2) bolts that connect the cabinets.
4472-0707
2 12
5
STACK-ON PRODUCTS COMPANY
P. O. BOX 489
WAUCONDA, IL 60084
MODEL GC-500-5
PISTOL-AMMO CABINET ASSEMBLY
IMPORTANT: Install the shelf before mounting the cabinet to a wall.
Install shelf with (4) 10-32 nuts and bolts. (See figure 4)
Place foam pad in bottom of cabinet.
Insert the plastic plugs in the cabinet's top mounting holes.
4
IMPORTANT
Keep keys away from children. Keep this record of your serial and key
numbers in a secure place separate from your security cabinet. If you lose your
keys you will need this information as a reference for obtaining new keys. To
order a replacement key set, follow the instructions on the attached form.