Buffalo Technology WHR3-G54 - Manual (Page 45)

45
Network Settings
Routing Setup
RIP transmission to WAN - Allows RIP
transmission or None (no RIP) to WAN
RIP reception from WAN - Allows RIP
reception or None (no RIP) from WAN
RIP transmission to LAN - Allows RIP
transmission or None (no RIP) to LAN
RIP reception from LAN - Allows RIP
reception or None (no RIP) from LAN
RIP transmission to WAN - Allows RIP
transmission or None (no RIP) to WAN
Display current information - Allows
administrator to view and delete routing
information.
Click Add Route to Add a Routing Table Entry
•Destination address - Network IP address and subnet mask.
• Gateway - Address through which the packet passes before it reaches the des ti na tion address.
Routing
Setup
Advanced Settings