Sulky VISION 1 DPB Quick set-up - Manual (Page 2)

DPA DPB : Quick-start guide
SET menu
d
Setting the working width :
- Use the numeric keypad and
confirm with
- Then, to exit, press on
e
This allows a stored fertiliser to be selected :
. Press on then,
. Press on or to select a letter to asign to a type of fertiliser.
Note : the T-factor is attributed to the selected fertiliser, it is updated each
time a rate calibration test is performed (in the Main menu).
- select the floor belt speed (medium or slow)
- select the reducer if low rates (yes or no)
. Then, to exit, press on
Before filling the machine
c
Calibrate the forward speed over 100 m :
! The belt must be engaged
- Press on
(choose tractor n°1)
- Press on
- Position the cursor on « calibration
over 100 m » with
- Press on
(data confirmation)
- Once in front of the first mark
press on
- Then, follow the on-screen
instructions
- After, press on to exit.
Réf : 400369 GB/DIS - 01 Page 2 07/2007