Summit BIM70 - Manual (Page 25)

24
Control Box (behind front cover)
Descriptions of LEDs and buttons:
1. Red LED: Ice Full indicator light.
When this LED is lit, the ice storage bin is full of ice or there is something between the two
arms of the ice-full sensor in the ice storage bin. The unit will stop working. When ice cubes
are taken out of the ice storage bin, clearing the sensor, the red LED will keep flashing for
3 minutes. Then the unit will restart and return to the Ice Making mode.
2. Green LED: Ice Making indicator light.
When this LED is lit, the unit is working in the Ice Making mode controlled by a temperature
probe on the evaporator. When the green LED is flashing, the unit is working in the Ice Making
mode controlled by a fixed timer.
3. Yellow LED: Ice Harvest indicator light.
When this LED is lit, the unit is working in the Ice Harvest mode controlled by a temperature
probe on the evaporator. When the yellow LED is flashing, the unit is working in the Ice
Harvest mode controlled by a fixed timer.
4. Clean button: When this button is pressed, the unit enters the Cleaning mode. The green and
yellow LEDs flash together. To stop the Cleaning mode, just press the button again.
Ice-full Clean
Ice-making
Ice-harvest Mode