Installer checklist, Final instructions, Self help hints – Summit DW18 Installation Manual User Manual

Page 24

Advertising
background image

21

USA

8. INSTALLER CHECKLIST

Your installer must have completed and

checked the following:

The dishwasher is square and

level.

The dishwasher is fastened

securely to the cabinetry.

The dishwasher door opens and

closes freely. The dishwasher

door must close without hitting any

cabinetry or counter top.

The inlet water supply is turned on

and checked for leaks.

The drain hose has been

connected and checked for

leaks. There must be no kinks or

obstructions in the drain hose.

The drain hose must be installed

with a 28" (710mm) high drain

loop for drain hook-ups without

any air removed.

If the dishwasher drain is hooked

up to a garbage disposal, the drain

hopper plug must be removed.

The spray arms are free and

rotate freely.

The rinse cycle has been run.

The water level will be below the

filter screen after the end of the

wash program. It is normal to find

some water in the drain filter area.

9. FINAL INSTRUCTIONS

1. Press the On/Off button to turn the

dishwasher on.

2. Power indicator light comes on.

3. Use the Program Select button to choose

a washing program.

4. Start the program with the Start/Pause/

Cancel button.

5. Run the dishwasher through one

complete cycle. When the wash cycle is

completed, use the On/Off button to turn

the dishwasher off.

Notice :

If the dishwasher does not operate

properly, refer to the self help hints.

10. SELF HELP HINTS:

The screen does not come on:

Check to make sure the breaker

to the dishwasher is in the on

position.

Check to make sure that the

Supply cord is plugged.

No Water is coming into the dishwasher:

Check to make sure the hot water

shut-off is in the ON position.

Water does not drain:

Make sure drain hose is not kinked

or comes out of air gap next to the

sink.

Remove drain hose from disposal

making sure plug is removed.

Notice :

If your dishwasher is not operating

properly after following these

steps: Contact your dealer to

schedule an authorized service

agent to inspect your new

dishwasher for any function

related failure.

The manufacturer warranty does

not cover installation, conversion

or customer education service

visits.

You will find the model and serial number

information on the label located on the

right-hand side of the inner door of your

dishwasher, as shown above.

Notice :

Please make a copy of your invoice and

keep it with this manual and register your

dishwasher on-line.

Advertising
This manual is related to the following products: