Talos Security RMS (DRMX/DRMXU) - Manual (Page 10)

2. Press button to run saved route of PTZ movement
3. Press button to run saved route of PTZ movement
4.3.2 Relay Out Control
Users can control the relay out that connected to DVR. User can do activate and deactivate
of Relay device remotely.
1. Select a site from the device list.
2. Press buttons to set action as On/Off.
3. Display as (Off) / (On).
4. Time out of relay control set as 5 sec. so next command will be activated
after 5 sec.
4.3.3 2 Way Audio Control
Audio from Remote PC’s mic will be transferred to DVR’s Speaker.
1. Select a site from the device list
2. Press buttons and start to speak through mic of PC.
3. DVR side can hear a voice from Speaker.
4. 2way Audio button’s time out set as 120 sec, so next command for 2way audio
can be controlled after 120 seconds.
4.4 Basic functions
Users can App setting, Color setting. Sequence screen, live image capture and full screen.
4.4.1 App setting
Users can Configure SW.
1. Press button and select [App setting] item.
2. Users can apply several Filer mode for image.
3. Users can set the duration of image change during sequence mode.