Talos Security RMS (DRMX/DRMXU) - Manual (Page 16)

6.2. Start Remote upgrade
1. Press button and select [Remote Upgrade] item on menu.
2. Below Remote Upgrader will be appeared.
3. Input DVR’s information that needs to be upgraded.
(IP address, Port, User ID, Password)
4. Select a upgrade file (*.bin).
5. Press [Upgrade] button to start upgrade procedure.
6. After complete uploading the FW to DVR. DVR will start upgrade the system
automatically.
*DVR must be installed HDD before remote upgrading.
7. DVR setup Manager
7.1. DVR Setup Manager
DVR setup manager help to configure DVR’s setup from remote site.
The configuration file can be saved on PC and also can be applied to other devices also.
7.2. Start DVR Setup manager
1. Press button then select [DVR setup] item.
2. Setup manager will be executed.
3. User can configure DVR’s setup through this manager SW.