Telematrix SP750 PROGRAMMING - Manual (Page 4)

1. Speed Dial Feature Keys ……… Eleven (11) one-touch keys used for speed dialing.
2. Disconnect Key ……………………... Used to disconnect the line or place a new call.
3. Store Key ………………………………. Used to program user features.
4. Pause Key ........................... Used to place a timing delay when dialing.
5. Redial Key ......................…… Redials the last number dialed.
6. Flash Key ..................…………. Provides a timed line break
7. Mute Key …………………………….… Disables the handset and speaker phone microphones.
8. Conference Call Key ……………… Used for conference calls.
9. Numeric Dial Pad ………………….. Used for dialing.
10. Line 1 and Line 2 ………………….. Used to select line 1 or line 2.
11. Hold Key ……………………………….. Lighted key used for placing callers on hold.
12. Headset ON/OFF Key ……………. Lighted key used to turn the headset ON or OFF.
13. Speaker Key .………………......... Used to turn the speakerphone ON or OFF.
14. Volume Bar …………………..………. Adjusts the loudness of the handset receiver, the headset, and/or the speaker.
15. Handset ………………………………... Hearing-aid compatible handset.
16. Dial Key ..………................…... Used to automatically dial the number displayed on the LCD.
17. Delete Key …………………………….. Deletes stored Caller ID records and Phonebook (PhBook) records.
18. Up and Down Scroll Key ..….... Used to scroll Caller ID and Phonebook (PhBook) records.
19. Touchlite TM Key ...…………………. Message Waiting Lamp (LED indicator) that blinks to indicate a new message in the
user’s voice mail box (user must be subscribed to a messaging system).
20. LCD Display ...............……..... Large adjustable back-lit display that shows Caller ID, number of calls received, date
and time, and call log.
21. Phonebook (PhBook) Key …….. Used to access names and numbers in the Phonebook (PhBook) directory.
Spectrum PLUS
TM
SP750 Telephone Key Features
To Program Speed Dial Locations
1. Press and hold the “STORE” key quickly. The words “SET UP MONTH: 01” appear (figure 1).
2. Next, press the speed dial location key where the desired location will be. The display will read “Mxx NO CONTENT”. If the
display shows a record, then there is a stored name and number in that location (figure 2).
3. Press the “STORE” key again and the display will read “ENTER NUMBER” (figure 3).
4. Using the dial pad, enter the number. Note that the local area code is not required if AREA CODE is pre-programmed into memory.
5. After entering the number, press the “STORE” key. The display will read “ENTER NAME” (figure 4).
6. Using the keypad, enter the name associated with the number being programmed and include the Flash, and/or Pause, when needed.
7. Press the “STORE” key to store the entry.
8. Program other speed dial locations, repeat 2 to 7.
9. To exit the program mode, press “DISC”.
Programming Procedure for Spectrum PLUS tm Speed Dial Features
The Spectrum PLUS TM SP750 has eleven (11) one-touch speed dial locations used for dialing frequently called numbers.
•
Speed dial programming must be done with the telephone plugged into the telephone line. •
Programming is performed with the telephone on-hook only. •
A maximum of 32 digits can be entered into ENTER NUMBER and 12-characters into ENTER NAME.
Programming Speed Dial Keys
Figure 2 Figure 3
M01 NO CONTENT
12/01
PM
12:00
ENTER NUMBER
12/01
PM
12:00
ENTER NAME
12/01
PM
12:00
Figure 4 Figure 1
SET UP MONTH: 01
12/01
PM
12:00