Mull post replacement – Therma-Tru Doors Repair and Replacement User Manual
Page 16
Advertising
Repair and
Replacement
5.16
2014
SITE 5
Mull Post Replacement
Adjustable Sill
Systems:
Cut mull post loose as close to
head and sill as possible.
Use a chisel to split ends of
mull post clean from head
and sill mortise pockets.
Cut away all old fasteners
flush with head frame and
sill substrate. Cut away
and clean off all old caulk.
CAUTION:
Remove corner seal pad
and adjustable saddle
from sill.
Corner
seal
pad
Adjustable
Saddle
Advertising