Unisteer 8001550 Corvette Manual Rack & Pinion Kit 1958-1962 - Manual (Page 4)

Page 4 656470
5. Disconnect the lower coolant line from the radiator.
6. Depending on your trans cooler routing, you may have to disconnect them to remove the radiator.
7. Unbolt the radiator from the core support and slide up and out of the vehicle.
8. Carefully unbolt the core support from the body. Make sure the body is supported before
removing the bolts. If the body is not supported it may crack.
9. Now that the radiator is out of the way, you can get to the two bolts coming thru the core support
down into the steering arm assembly.
10. Remove all the bolts from the lower steering arm assembly, as well as the tie rod ends from the
spindles and the steering linkage to the gear-box.
11. Remove steering arm assembly.