Unisteer 8050690 Mustang Manual Steering Shaft 1979-1973 User Manual
Kit contents, Pg. 1
pg. 1
655360
1979-1993 MUSTANG MANUAL STEERING SHAFT
INSTALLATION
# 8050690
Full refund will NOT be granted to any kits that are
damaged, scratched, or altered in any fashion.
KIT CONTENTS:
#
Description
Part Number
Quantity
1
Column Insert
541830
1
2
“DD” Shaft w/Spline
542960
1
3
Joint, Spline X Spline (w/2 bolts & washers)
8050440
1
4
Joint, “DD” X spline (w/2 bolts & washers)
8050230
1
Remove stock steering shaft:
1. Center the front wheels and steering wheel, making sure the wheels
don’t move from this
position.
2. Turn ignition off
(AIR BAGS CAN BE DEPLOYED IF CAR IGNITION IS LEFT ON).
3. Unbolt stock steering shaft from the steering column, and rack and pinion. Push the
steering shaft up toward the firewall until the lower steering coupler comes off the rack
and pinion. If the shaft is corroded and won’t come free, remove the rack and pinion
assembly from the frame and then remove shaft.