UVP BioLite - Manual (Page 9)

Manual BioLite MultiSpectral Light Source 9
4. Thread the knurled (non-smooth side) of the fiber optic cable from the inside of the darkroom
through the hole created by removing the stopper until the large bulb separating the smooth and
rough side of the fiber optic cable can no longer be pushed through the opening.
5. Remove the rubber cap from the input side of the fiber optic trunk and insert the fiber optic
receptacle into the round silver connector on the front of the BioLite.
6. Secure the fiber optic receptacle to the silver connector with the set screw on the BioLite.