UVP HybriCycler - Manual (Page 7)

HC-3000 HybriCycler Hybridization Oven 7
Care and Cleaning
The drawer-style spill tray is designed to contain any spills that leak from any of the
bottles within the Hybridization Chamber. The spill tray has a fluid capacity of 300ml.
The inside of the HybriCycler Hybridization Chamber should be cleaned with a damp
cloth. The bottle carousel and outside of the HybriCycler can be cleaned with soap and
water. The chamber, rollers and spill tray may be decontaminated by wiping clean with a
decontaminating agent*, then repeat with distilled water. Rollers and carousel guide are
removable facilitate cleaning.
NOTE: *This decontamination method may not remove all contaminants. Refer to
Federal, State and Local Guidelines and Biological Protocols to assure decontamination.
If any unit requires service, a Returned Goods Authorization (RGA) must be obtained
from UVP’s customer service department prior to returning any equipment to UVP. If
radioactive or biological hazardous material has been used within the unit, radioactive
decontamination and biological clean-up as per current Federal, State and Local
Guidelines and Biological Protocols must be performed, BEFORE returning the unit to
UVP.
Replacement Parts
Replacement parts lists are provided below for the HC-3000 HybriCycler Systems.
Repairs or replacement other than specified in the following procedures shall be done
only by authorized service personnel.
Qty
Part Number
Fuse, 10 Amp, 250V 5x20mm, Slo-Blo 2 ea 56-0002-04
Main Motor Switch 1 ea 53-0165-02
Power Cord, 115V 1 ea 58-0085-01
Power Cord, 230V 1 ea 58-0085-03
Adjustable Feet 4 ea 72-0062-01
Carousel Assembly 1 ea 76-0089-01
Roller Assembly 2 ea 76-0309-01
Bottle, Small 35x150mm
07-0194-02
Bottle, Large 35x300mm 07-0194-01
Technical Support and Maintenance
UVP offers technical support for all of its products. If you have any questions about the
product’s use, operation, or repair, please call or fax UVP Customer Service at the
following numbers:
In the US toll free (800) 452-6788 or (909) 946-3197, fax: (909) 946-3597, email: [email protected]
In Europe/UK call +44(0)1223-420022 or fax: +44(0)1223-420561, email: [email protected]