UVP BioSpectrum Imaging System - Manual (Page 13)

BioSpectrum Imaging System 13
Camera Installation
High sensitivity, scientific grade CCD cameras are designed for use with UVP’s BioSpectrum Imaging
Systems. This section covers the components and steps required to install and operate UVP’s cameras.
Each camera has slightly different installation instructions, and the following cameras are covered in this
manual:

GelCam 310

BioChemi 510

OptiChemi 610

MegaCam 810
Refer to the packing list for the camera included with your specific system.
GelCam 310 Camera
Camera Specifications
Specifications GelCam 310 Camera
Type CCD, Monochrome
Resolution 1600 x 1200
Bit Depth 16-bit
Quantum Efficiency NA
Cooling None
Binning None
PC Interface USB
Components

GelCam 310 Camera

Motorized lens

+2 diopter

Bracket

Base (typically shipped installed
on system)

Base Mounting Screws

USB Cable (for connection from
camera to PC)
NOTE: Camera may be a different
color or size than shown.
1
2
3
4
5
6
7