UVP VisiDoc-It Imaging System - Manual (Page 9)

VisiDoc-It Imaging System 9
To shut down the TS software, touch the X on the bottom left corner of the screen.
To turn the system off, press the MAIN POWER button or power down from the Windows icon on the bottom
right corner of the screen.
Refer to Touch Screen Interface in this manual for detailed instructions on using the software.
Using the Transilluminator
To use the transilluminator, turn on the transilluminator power on the front of the unit.
NOTE: When the transilluminator is illuminated, ensure that the UV blocking cover is in position to prevent
any exposure to UV.
Image Focusing
Prior to capturing images, prepare the image focus capabilities of the system:

Turn on the transilluminator and place the Fluorescent Focus Target on the transilluminator surface.

While watching the LCD screen, rotate the lens f-stop adjustment so that the image is bright enough to
see on the screen.

Rotate the lens focus adjustment on the lens. Adjust this so that the image appears in clear focus on the
LCD monitor. Note: Once the proper zoom range is set, the lens will have to be refocused when
zoomed in completely.

Rotate the zoom lens adjustment so that the image is as large as possible. Readjust the focus ring on
the lens, making the image clear. Adjust the zoom so that the object of interest is within the frame on
the LCD monitor.