UVP VisiDoc-It Imaging System - Manual (Page 4)

VisiDoc-It Imaging System 4
System Specifications
Camera
The VisiDoc-It includes the FluorCam 210 Camera
with a resolution of 640 x 480 (VGA) and a USB 2.0
PC interface. All camera settings are factory pre-set
for optimum performance when viewing gels, films,
or membranes under low light level conditions. UVP
Technical Support should be contacted before
making any adjustments to the camera settings.
Lens
The 8-48 mm zoom lens is fitted with a close-up
diopter and step-up ring. The camera can then be
held in a fixed position. The diopter is for focusing
on objects at the focus length of the VisiDoc-It
system.
Processor

Internal Storage: 75GB or more

USB 2.0 ports: 1 front, 4 in the back

USB storage device capacity: 8GB (minimum)

Software: TS software
Ethidium Bromide Filter (EtBr)
The Ethidium Bromide (EtBr) Filter (50mm sq.) UV
blocking bandpass interference filter blocks UV and
IR radiation emitted from the transilluminator. The
filter is placed in the filter tray below the camera
assembly. The filter allows visualization of
fluorophores from 580-630nm, targeting the EtBr
emission which peaks at 605nm. The EtBr filter can
be substituted for other specific fluorophore filters or
removed when imaging non-fluorescent media
(protein gels, colony plates, etc.) in order to produce
brighter images.
Hood Enclosure or Camera Stand for the VisiDoc-It System
The compact hood enclosure is manufactured of lightweight plastic for portability. Handles are
positioned on two sides of the hood to make it easy to move the hood for access to the transilluminator
surface. The camera with a zoom lens is mounted on top of the hood or camera stand.