Transilluminator, Lcd touch screen, Focus target – UVP VisiDoc-It Imaging System User Manual

Page 5: Removable usb stick, Optional equipment

Advertising
background image

VisiDoc-It Imaging System

5

Printer

UV/White Converter Plate

Transilluminator

For VisiDoc-It systems, transilluminators are optional equipment. The VisiDoc-It System can
accommodate UVP’s Benchtop and FirstLight transilluminator models. The VisiDoc-It (with stand
design) can also accommodate the High Performance UV Transilluminators (25-watt) and White/UV
Transilluminators (8-watt). UVP offers a variety of transilluminators, from the benchtop models with 8-
watt, single wavelength and single intensity to multiple wavelengths and high/low intensities, or the
highly uniform FirstLight transilluminator.

LCD Touch Screen

The display is an 8-inch VGA color touch screen connected to the darkroom cabinet with tilt adjustment.
The touch screen allows the user to preview, snap, save and print images, as well as select certain
preference options, without the need of an external mouse or keyboard.

A stylus pen is included for increased pointer control for selecting software options on the touch screen.

Focus Target

The focus target fluoresces when placed on a transilluminator or when exposed to overhead UV. The
Target provides sharp, fluorescent images to aid in adjusting the focus of the camera.

Removable USB Stick

The removable USB stick has 8GB memory (minimum) included with the system which connects to the
system allowing transfer of images.



Optional Equipment


Refer to the ordering information section of this manual for
optional equipment part numbers.

Thermal Printer

The thermal printer provides archive quality, 256 grayscale
prints, and five optional cost-effective print sizes.

Converter Plates

The UV/White Converter Plate allows imaging of non-
fluorescent stained media with an ultraviolet transilluminator.
The converter plate is specially coated to convert the 302nm
UV output to white light, rather than using a separate white
light box.

The Visi-Blue Converter Plate converts UV to 460-470nm
designed for use with blue excitation samples and SYBR
green, SYPRO orange and GFP stains.

Transilluminators

If the system does not include a transilluminator (check the packing slip), contact UVP for ordering
information or go to

www.uvp.com

. Available transilluminators include the compact 8-watt models to the

high performance FirstLight Transilluminator.

Advertising
This manual is related to the following products: