UVP Benchtop UV Transilluminator User Manual

Page 6

Advertising
background image

Place gel/sample on the filter area. It is recommended to place the gels on a UVP Gel-Tray (see Section 10
for part number) to protects filter surface from cuts and scratches. It is recommended that gloves be worn
to avoid contact with gel and staining agents.

Press the ON/OFF switch to ON. The UV tubes within the unit should be glowing beneath the filter after a
momentary flickering during the start-up period.

After viewing/photographing the sample, turn the unit off.

Clean unit surface with a damp soft cloth or sponge. Never use abrasive cleaners (can damage the UV
filter surface).

If you have any questions, call UVP Customer Service toll free in the U.S. at (800) 452-6788 or (909) 946-
3197 or contact your local dealer. In Europe, call Ultra-Violet Products Limited in England at +44 (0) 1223-
420022.

2UV Benchtop Transilluminator

The 2UV Benchtop Transilluminator operates the same as the single UV version (Section 5.1) except that
it is equipped with a 365/302nm switch. The transilluminator can be turned on with the UV selector switch
in any position.

3UV Benchtop Transilluminator

The 3UV Benchtop Transilluminator operates the same as the single UV version (Section 5.1) except that
it is equipped with a 365/302/254nm switch. The transilluminator can be turned on with the UV selector
switch in any position. However, when switching between wavelengths, the following should be done to
avoid any merging of wavelengths.

1.

Turn main power switch (green) off.

2.

Actuate three-position switch to desired wavelength location.

3.

Turn main power switch on.

Maintenance/Repair/Technical Assistance

UVP offers technical support for all of its products. If you have any questions about the product’s use,
operation or repair, please call or FAX UVP Customer Service at the following numbers. In the US: toll free
(800) 452-6788; Tel: (909) 946-3197; Fax: (909) 946-3597. In Europe/UK: +44(0)1223-420022 or Fax: +44(0)1223-
420561

Note: A Returned Goods Authorization (RGA) number must be obtained from UVP Customer Service
before returning any product.

Benchtop UV Transilluminators

Page 4

Advertising
This manual is related to the following products: