BlueAnt X5i - Manual (Page 17)

17 X5i Stereo Bluetooth Headset
Remote Control Function
z Headset can be used to remote control playback functions if Headset is
connected to audio device supporting A2DP and AVRCP.
- To play ‘Next’ song, click and hold Vol Up button for 1 sec.
- To play ‘Previous’ song, click and hold Vol Down button for 1 sec.
- To ‘Pause’, click MFB once during play.
- To ‘Resume’, click MFB once in ‘Pause’ mode.
- To ‘Stop’, click ON/OFF button once during play.
- To ‘Replay’, click MFB once.
Hints for Optimum Audio Transmission
z The performance of wireless audio streaming depends on the
environment where it is used.
z Walls, partitions, doors, furniture etc can block the path of transmitted
radio signals thereby resulting in shorter range and even sound
distortions.
z Likewise, the human body also affects the performance especially when
the Audio Streamer connected to audio device is held close to the body.
z It is therefore a good practice to use Headset and Audio Streamer on the
right side of the body as the right side of the Headset communicates
with the Audio Streamer.
z Also, do not cover the Audio Streamer or the right side of Headset with
your hands as it may hinder the proper transmission of signals.
② ON/OFF Button
③ Vol Up Button
Foam Speaker Covers: The included foam speaker covers give the
user the option of different comfort levels depending on what the user
prefers. Using the foam covers will provide a better bass response as
the speakers in the headset will sit closer to the ears than the padded
version.
To change covers, gently removing the padded ones and apply the foam
covers taking care not to force them.
① MFB Button
④ Vol Down Button