Vicor VIPAC Array CONFIGURATION GUIDE - Manual (Page 7)

6 v i c o r p o w e r . c o m / v c a d
O UTPUT C ONNECTION O PTIONS
Mating Connector Kits
Vicor P/N 25073
Vicor P/N 25067
Vicor P/N 25061
PlugMate
(Factory Installed Option)
Micro PlugMate
Mini PlugMate
Maxi PlugMate
Pin # Function Pin # Function
1 +Vout 5 +Vout
2 +Vout 6 N/C
3 –Vout 7 SC
4 –Vout 8 –Vout
Pin # Function Pin # Function
1 +Vout 10 +Vout
2 +Vout 11 +Vout
3 +Vout 12 +Vout
4 N/C 13 +S
5 N/C 14 SC
6 N/C 15 –S
7 –Vout 16 –Vout
8 –Vout 17 –Vout
9 –Vout 18 –Vout
Pin # Function Pin # Function
1 +Vout 13 +Vout
2 +Vout 14 +Vout
3 +Vout 15 +Vout
4 +Vout 16 +Vout
5 +Vout 17 +Vout
6 N/C 18 +S
7 SC 19 –S
8 –Vout 20 –Vout
9 –Vout 21 –Vout
10 –Vout 22 –Vout
11 –Vout 23 –Vout
12 –Vout 24 –Vout
1 4
5 8
1 9
10 18
1 12
13 24
Mating Connector Amp. P/N Vicor P/N
Housing TYC-794657-8
25056
Pin 1-106529-2 24796
Kit 25073
Mating Connector Amp. P/N Vicor P/N
Housing TYC1-794657-8 25050
Pin 1-106529-2 24796
Kit 25067
Mating Connector Amp. P/N Vicor P/N
Housing TYC2-794657-4 25044
Pin 1-106529-2 24796
Kit 25061
Please Note:
VIPACs that contain multiple modules configured as a single output (paralleled for power
or redundancy) MUST have their Outputs and Sense connected to each other at the load.
DO NOT OPERATE A PARALLEL CONFIGURATION WITH ONLY ONE MODULE CONNECTED.
Additionally one module must be designated as “Master” by having all other modules
configured as “Boosters”. Boosters are created by shorting the SC pin to –S.