Waldmann PULSE HFMD version VFC IV - without MFT - Manual (Page 14)

14
Operating Manual Light Control „PULSE HFMD - Vers. IV without MFT“ ENG
Activate setting level 2
LED II flashes red
Actuation Display
Press both keys
once for 10 seconds and
once for 5 seconds
Function 2.1 Sensitivity high ON/OFF
LED II flashes red
LED I green
Change function from ON to OFF or vice versa
Press key I
Change the basic settings - Setting level 2
Note: To change the following functions from ON to OFF or
vice versa, the following key actuations and displays,
as described here, apply.
LED I
LED II
LED I
LED I changes from constant to
flashing or vice versa:
- constant = Function ON
- flashing = Function OFF
Release both keys
Fig. 4
Key I
+ LED I
Sensor Key II
+ LED II
Note: The functions written
in blue are not available.