Waldmann PULSE HFMD version VFC IV - without MFT - Manual (Page 5)

5
Operating Manual Light Control „PULSE HFMD - Vers. IV without MFT“ ENG
In-factory setting
The lights are set in-factory so
that initially they can be operated
without changing the settings.
To adapt the light to your indivi-
dual needs, the parameterisation
functions (see page 8-23) can be
changed accordingly.
Operation
Restoring the in-factory
setting
To restore the default settings,
press one of the two keys [I or II]
while the power supply is swit-
ched on.
The following functions are re-
stored:
- Parameterisation functions are
set to standard setting.
- All control parameters are set to
standard setting.
- All control and follow-up times
are set to standard setting.
- The burn-in time is deleted (func- The burn-in time is deleted (func-
tion „OFF“).
Operating and
display elements
All operating and adjusting func-
tions can be carried out from the
sensor operation panel [fig. 4].
The functions and ajdustments are
displayed at the sensor operating
panel via both LEDs (I or II).
Fig. 4
Key I
+ LED I
Sensor Key II
+ LED II