WarmlyYours Lava User Manual
Page 4
DELIVERY | PACKAGING
LAVA® 500W | 750W | 1000W
The LAVA® glass radiator must be fixed only with the
supplied mounting hardware. Screws and anchors
must correspond with the building material of the wall
(masonry, concrete, plasterboard, etc.). Drywall anchors
are included. The wall must have a flat surface.
Wall mounting kit for
LAVA® 250W:
• LAVA® Glass Radiator
• 1 x Wall mounting hardware:
A - 4 x mounting bracket
B - 2 x screw M5 x 16
C - 2 x washer
D - 2 x nut
E - 4 x hex bolt M8 x 16
- 1 x cable clamp (not pictured)
- 4 x wall anchor & screw (not pictured)
F - 1 x wall protection plate
K - 8 x Anchors
After attaching hardware, do not tighten completely!
Only tighten hardware when unit is assured to mount by
test fitting unit.
Electrical and electronic equipment
frequently contain valuable materials. They
may also contain harmful substances that
were necessary for their function and safety.
The residual waste or incorrect treatment
can harm the environment. Please help
protect our environment! Dispose your old
unit according to the local regulations.
ATTENTION: Packaging materials, must be disposed of
properly.
Installation and Usage Instruction | LAVA® Design Glass Radiator
3
BACK
Stud
A
F
B
C
D
E
K