Before you start – WarmlyYours TH115-AF-GA User Manual
Page 4
Owner’s Guide
2
ENG
LISH
Read the entire document
CAUTION:
•
Installation must be carried out by a certified electrician and must comply with national and
local electrical codes.
•
Use this thermostat for resistive loads only.
•
Do NOT install the thermostat in an area where it can be exposed to water or rain.
•
To prevent severe shock or electrocution, always turn the power OFF at the service panel
before working with wiring.
•
Install the thermostat onto an electrical box.
•
Use special CO/ALR solderless connectors if you connect the thermostat to aluminum wires.
•
Keep the thermostat's top and bottom air vents (openings) clean and unobstructed at all
times.
Before you start
400-115-059-A (WarmlyYours TH115-AF-GA-08) 5 x 3.125 EFS.book Page 2 Friday, January 22, 2010 9:48 AM