Wasp Barcode WLS9600 Quick Reference Guide - Manual (Page 19)

Programming Barcodes
Quick Reference Guide 15
Programming Barcodes
For your convenience, this guide includes the programming bar-
codes required to configure the reader for use with different inter-
face (terminal/host) types.
See the Product Reference Guide (PRG) for more complete infor-
mation about programming and configurable features. You can
download the latest version of the PRG and any other available
publications for the reader from the website listed on the back cov-
er of this manual.
Resetting the Standard Product
Defaults
If you aren’t sure what programming options are in your reader, or
you’ve changed some options and want the factory settings re-
stored, scan the Factory Default Settings barcode below. This will
copy the factory configuration for the currently active interface to
the current configuration.
Factory Default Settings
Some interfaces require the scanner to start in
the disabled state when powered up. If addi-
tional scanner configuration is desired while in
this state, pull the trigger and hold it for five
seconds. The scanner will change to a state that
allows programming with barcodes.