Blaupunkt BRIGHTON MP27 - Manual (Page 13)

40
"SENS HI6" means that the tuner is set to
the highest sensitivity setting. "SENS LO1"
means it is set to the lowest sensitivity set-
ting.
Set the desired sensitivity level using
the buttons
6.
When you have fi nished making your chang-
es,
press the MENU button
:.
Note:
You can set different sensitivity levels
for FM and MW or LW (AM).
Storing stations
Storing stations manually
Select the desired memory bank (FM1,
FM2, FMT) or one of the wavebands
(MW or LW).
Tune into the desired station.
Press and hold down one of the station
buttons
1 - 5
< for longer than two
seconds to assign the station to that
button.
Storing stations automatically
(Travelstore)
You can automatically store the fi ve sta-
tions offering the strongest reception in the
region (FM only). The stations are stored in
the FMT memory bank.
Note:
Any stations that were previously
stored in this memory bank are deleted
in the process.
Press and hold down the BND/TS
?
for longer than two seconds.
u
u
u
u
u
u
The storing procedure begins. "FM TSTORE"
appears on the display. After the process
has completed, the radio will play the sta-
tion that is stored in memory location 1 of
the FMT memory bank.
Listening to stored stations
Select the memory bank or waveband.
Press the station button 1 - 5
< of the
desired station.
Scanning receivable stations
(SCAN)
You can use the scan function to play all the
receivable stations briefl y. You can set the
scanning time from 5 to 30 seconds in the
menu (in increments of 5 seconds).
Starting SCAN
Press and hold down the MENU button
: for longer than two seconds.
Scanning begins. "SCAN" appears briefl y
on the display followed by a fl ashing display
of the current station name or frequency.
Cancelling SCAN and continuing
listening to a station
Press the MENU button
:.
Scanning stops and the radio continues
playing the station that it tuned into last.
Setting the scanning time
Press the MENU button
:.
Press the or button
6 repeat-
edly until "SCAN TIME" appears on the
display.
Set the desired scanning time using the
buttons
6.
u
u
u
u
u
u
u
Radio mode
02BrighRavRimSDie27_gb.indd 40 02BrighRavRimSDie27_gb.indd 40 24.10.2006 11:41:10 Uhr 24.10.2006 11:41:10 Uhr