Selecting tracks, Fast track selection, Fast searching (audible) – Blaupunkt BRIGHTON MP27 User Manual

Page 17: Random track play (mix), Scanning tracks (scan), Repeating tracks (repeat)

Advertising
background image

44

The CD starts playing.

The display shows the CD symbol.

Notes:

The CD symbol indicates that a CD is
located in the drive.
A border surrounding the CD symbol
indicates that CD is selected as au-
dio source.

If the vehicle ignition was switched
off prior to inserting the CD, you
must switch in on fi rst with the but-
ton

2 to start the playback.

If a CD is already inserted in the drive,

press the

SRC/ button

> repeated-

ly until "CD" appears on the display.

Playback begins from the point at which it
was last interrupted.

Selecting tracks

Press one of the arrow buttons

6 to

select the next or previous track.

If you press the or button

6 once, the

player will play the current track again from
the beginning.

Fast track selection

To quickly select tracks backwards or for-
wards,

press and hold down one of the
buttons

6 until fast-reverse / fast-for-

ward track selection begins.

Fast searching (audible)

To fast search backwards or forwards,

press and hold down one of the
buttons

6 until fast searching back-

wards / forwards begins.

u

u

u

u

Random track play (MIX)

Press the

5 MIX button

<.

"MIX CD" appears briefl y on the display
and the MIX symbol lights up. The next ran-
domly selected track will then be played.

Cancelling MIX

Press the

5 MIX button

< again.

"MIX OFF" appears briefl y on the display
and the MIX symbol disappears.

Scanning tracks (SCAN)

You can scan (briefl y play) all the tracks on
the CD.

Press and hold down the

MENU button

: for longer than two seconds.

The next track will then be scanned.

Note:
You can set the scanning time. For
further information, please read the
section entitled "Setting the scanning
time" in the "Radio mode" chapter.

Cancelling SCAN and continuing
listening to a track

To stop scanning, press the

MENU but-

ton

:.

The currently scanned track will then con-
tinue to be played normally.

Repeating tracks (REPEAT)

If you want to repeat a track,

press the

4 RPT button

<.

"RPT TRCK" appears briefl y on the display
and the RPT symbol is displayed. The track
is repeated continuously until you deacti-
vate RPT.

u

u

u

u

u

CD mode

02BrighRavRimSDie27_gb.indd 44

02BrighRavRimSDie27_gb.indd 44

24.10.2006 11:41:11 Uhr

24.10.2006 11:41:11 Uhr

Advertising