Burnham Indirect - Fired Water Heater AL SL - Manual (Page 2)


PLEASE READ INSTRUCTIONS CAREFULLY
BEFORE INSTALLING WATER HEATER
U.S Boiler Company, Inc. – Burnham Hydronics (herein called the Company) intends that this Alliance SL™
Indirect-Fired Water Heater be used as a separate zone to a heating system boiler.
This appliance is designed to heat water by circulating water from the boiler through the internal coil in the
tank. We specifically do not warrant this tank for high temperature applications such as wood stoves or
steam producing systems. Such use of this product will automatically void the warranty.
The design anticipates the proper installation and care in use of the product. There is risk of property dam-
age and personal injury inherent in the use of any hot water system. The Company cannot supervise the
installation and therefore makes it a specific condition of the warranty that the customer will supervise the
installation and use of this product to be sure they are performed in accordance with safe guidelines and
proper local or national codes.
Generalized instructions and procedures cannot anticipate all situations. For this reason, only qualified
installers should perform the installation. A qualified installer is a person who has licensed training and a
working knowledge of the applicable codes, regulations, tools, equipment and methods necessary for safe
installation of a boiler system and an indirect water heater.
An installation checklist has been provided to help the customer ensure that all procedures for a safe instal-
lation have been followed.
If questions regarding installation arise, check with your local plumbing and electrical inspectors for proper
procedures and codes. Local codes take a precedent over instructions in this manual.
GENERAL INFORMATION
SPECIFICATIONS & RATINGS
Alliance SL
Model
Specifications Ratings
Potable
Volume
(gal.)
Height
(in.)
Diameter
(in.)
Weight
(lbs.)
1st Hour
(gal./hr)
Cont. Draw
(gal./hr)
Standby
Loss
(°F/hr)
AL 7SL 27 39.25 20.00 170 192 162 0.97
AL 35SL 35 39.25 22.75 198 200 162 0.72
AL 50SL 50 40.75 26.00 248 225 171 0.56
AL 70SL 70 45.75 28.00 300 294 217 0.45
AL 9SL 119 67.75 26.00 480 339 235 0.39
Domestic Water Inlet / Outlet = 3/4”M — T&P Valve = 3/4”F
Boiler Water Supply / Return = 3/4”M — except AL 119SL = 1.0”M