WORX WU645.1 210W Palm Sander 240V - Manual (Page 11)

11
Start your sander before sanding and turn off only after
stopping sanding. For best results sand wood in the direction of
the grit.
Do not start sanding without Sanding Paper fitted.
Do not allow the Sanding Paper to wear away, it will damage
the base-plate. The guarantee does not cover base-plate wear
and tear.
Use coarse grit paper to sand rough surfaces, medium grit for
smooth surfaces and fine grit for the final surfaces. If necessary,
first make a test on scrap material.
Use only good quality Sanding Paper.
The sanding efficiency is controlled by the Sanding Paper not
the amount of force you apply to the tool. Excessive force
will reduce the sanding efficiency and cause motor overload.
Replacing the sanding paper regularly will maintain optimum
sanding efficiency.
Maintenance
Remove the plug from the socket before carrying out any
adjustment, servicing or maintenance.
There are no user serviceable parts in your power tool. Never use
water or chemical cleaners to clean your power tool. Wipe clean
with a dry cloth. Always store your power tool in a dry place. Keep
the motor ventilation slots clean. Keep all working controls free
of dust. Occasionally you may see sparks through the ventilation
slots. This is normal and will not damage your power tool.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard.
Environmental protection
Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check
with your local authorities or retailer for recycling advice.