WORX WU645.1 210W Palm Sander 240V - Manual (Page 9)

9
and secured underneath both Locked Clamps (3). This will
ensure safe and efficient sanding performance.
cHanging Hook & looP Sanding PaPeR
(only foR Wu645)
The sanding paper and baseplate are provided with a hook and
loop attachment system to allow quick and easy changing of the
sanding and polishing accessories. Remove any dust or other
objects from the hook and loop on the baseplate and sanding
paper. Position the sanding paper evenly on the baseplate
and firmly press down to attach them together. If the sanding
paperhas dust extraction holes you must align these with the
holes in the baseplate, otherwise the dust extraction will not
function. To remove the sanding paper lift one corner of the
paper and pull it off from the baseplate (See Fig. B.2).
PaPeR PuncH
If using sanding paper without dust holes, use the paper punch
(7) to perforate the holes to ensure correct dust extraction.
Position the punch over the base-plate (8) with the punch sides
on the edges of the base-plate (See Fig. C). Press the punch
into the base-plate to punch holes into the sanding paper. Then
remove the punch and check all the holes have been formed
correctly.
duSt Bag
Always operate your sander with the dust bag fitted. For the
best performance always empty the dust bag in time. Open the
zip and empty the dust from the bag. To remove the bag ,slide
the mounting bracket out and away from the sander
4
5
6
E
C B.2
D