X-1 (H2O Audio) S5-1A3 - Manual (Page 3)

H2O Audio wants you to know:
»
H2O Audio housings are designed for
specific Apple iPod models, which vary by
generation and storage size. You must ensure
the correct housing is used for your iPod.
»
Before using this housing for the first time,
you must perform a 'Leak Test'. Please refer to
the Printed Instructions for more information.
»
To accommodate the different iPods (with
video) storage sizes, you may have to swap the
existing rails with the included rails. Please refer
to the Rail Instructions for more information.
»
It is extremely important you ensure the
T-Seal is properly seated and clean. If it is out of
alignment, twisted or dirty you will cause
damage to, or destroy your iPod.
»
If you have any concerns or issues with a
H2O Audio product do NOT contact your local
retailer. Please contact
H2O Audio:
1.800.708.6080
858.623.0339
[email protected]
www.h2oaudio.com
H2O Audio
11211 Sorrento Valley Rd. Suite F
San Diego, CA 92121 USA