X-1 (H2O Audio) S5-1A3 - Manual (Page 4)

1. Installing and Replacing Housing Rails
4.
Repeat steps 1 - 3 for the other clear rail.
3.
Replace the clear rail that was removed, with a thin grey
rail provided in this bag.
2.
Once all the screws are removed, gently lift the clear rail
out of the housing. Do not leave any screws in the
housing as they may interfere with the accurate closure
of the housing.
1.
Use the small Phillips Screwdriver in a counterclockwise
direction to remove all three ( 3 ) screws from the clear rail.
NOTE: Be very careful, do not damage the T - Seal with the screwdriver.
CAUTION: For the iPod ( with video ) 60Gb and 80Gb to fit
into the housing you must replace the thick clear rails that
come installed in the housing with thin grey rails which are
included in this bag.
S5 - 52 20070306
*If you are unsure which rails you need or if you need rails please contact H2O Audio*