Battery safety – 3D Robotics X8 Ready-to-Fly 2013 User Manual
Page 3
3S
Connect the white connector to
the 3S port. Join the two yellow
connectors together.
Secure battery inside the guard
bag while charging. Charge until
the status indicator displays green.
Charging
Complete
red
green
guard bag
Protect battery from extreme heat, extreme cold, puncturing,
and flammable surfaces. Always transport, charge, and store
the battery in the guard bag.
Charge battery using a designated LiPo balance charger only.
Always monitor battery while charging.
Flying with a low battery is a safety risk and can render the
battery unusable. Always discontinue use when you receive a
low battery notification, and always fly with a fully charged battery.
Inspect battery for damage before takeoff and after landing.
If you observe any swelling of the package or the battery ceases
to function, locate your local battery recycling center to dispose
of the batteryo
find a location. Do not dispose of the battery in the trash.
!
Battery safety