What this kit includes, Tools that you need, What you need to do – Rockwell Automation 20L-RESPRE-A1 PowerFlex 700L Frame 3A and 3B Input Filter Precharge Resistor Kit User Manual
Page 2
2
PowerFlex® 700L Frame 3A and 3B Input Filter Precharge Resistor Kit (20L-RESPRE-A1)
Parameter 162 - [Capacitance] of the PowerFlex 700L Active Converter
must be set to the total DC bus capacitance of the PowerFlex 700L complete
drive plus the other drives connected to the DC bus.
What This Kit Includes
• Precharge Resistor Plate Assembly
• Four (4) M6 x 16 mm (0.63 in.) long hex head Taptite
®
screws
Taptite is a registered trademark of REMINC (Research Engineering & Manufacturing Inc.)
Note: The customer must provide wire, lugs, and hardware.
Tools That You Need
• 10 mm socket
• Phillips
®
#1 screwdriver
• Phillips
®
#2 screwdriver
• Torque wrench
• Wire stripper
Phillips is a registered trademark of Phillips Screw Company.
What You Need to Do
To install the PowerFlex
®
700L Frame 3A and 3B Precharge Resistor Kit:
❐ Step 1: Remove power from the complete drive.
❐ Step 2: Drill installation holes (only required for input filter panel
without holes).
❐ Step 3: Mount the kit.
❐ Step 4: Wire the kit.