Brother FAX-3800 - Manual (Page 53)

I N I T I A L S E T U P 4 - 4
Setting the Ring Volume
1
Press Menu/Set, 1, 4, 1.
2
Press to select OFF , LOW , MED or HIGH , and then press Menu/Set.
3
Press Stop/Exit.
—OR—
You can adjust the ring volume when your FAX/MFC is idle. You can turn the
ring
OFF or you can select a ring volume level.
Press to adjust the volume level. With each key press, the FAX/MFC rings
so you can hear the active setting as the LCD shows it.
Each key press changes the volume. The new setting will remain until you
change it again.
Setting the Beeper Volume
You can set the beeper to LOW , HIGH or OFF . The default setting is LOW .
When the beeper is set to LOW or HIGH , the FAX/MFC beeps every time you
press a key or make an error and when fax sending or receiving has finished.
1
Press Menu/Set, 1, 4, 2.
2
Press to select OFF , LOW or HIGH , and then press Menu/Set.
3
Press Stop/Exit.
Setting the Speaker Volume
1
Press Menu/Set, 1, 4, 3.
2
Press to select LOW , MED , HIGH or OFF , and then press Menu/Set.
3
Press Stop/Exit.
—OR—
If you are using Hook, you can adjust the speaker volume while dialing. You
can turn the speaker off or you can select a speaker volume level. The default
setting is the lowest volume.
Press to adjust the volume level. With each key press, the volume changes
as the LCD shows the active setting. The new setting will remain until you
change it again.
1 . R I N G
or
or
2 . B E E P E R
or
3 . S P E A K E R
or
or