Scarlett SC-4141 - Manual (Page 4)

www.scarlett-europe.com SC-4141 4
GB INSTRUCTION MANUAL
IMPORTANT SAFEGUARDS
· Before the first connecting of the appliance check that voltage indicated on the rating label corresponds to the mains
voltage in your home.
· For home use only. Do not use for industrial purposes. Do not use the appliance for any other purposes than described
in this instruction manual.
· Do not use outdoors.
· Always unplug the appliance from the power supply before cleaning and when not in use.
· To prevent risk of electric shock and fire, do not immerse the appliance in water or in any other liquids.
· Close supervision is necessary when it is used near children or invalids.
· Do not leave the appliance switched on when not in use.
· Do not use other attachments than those supplied.
· Do not operate after malfunction or cord damage.
· Do not attempt to repair, adjust or replace parts in the appliance. Check and repair the malfunctioning appliance in the
nearest service center only.
· Keep the cord away from sharp edges and hot surfaces.
· Do not pull, twist, or wrap the power cord around appliance.
· Never attempt to take food or liquid out from the container when the blade is moving. Always wait until the motor stops
completely.
· Do not overload the appliance with a food.
FOOD PROCESSOR ASSEMBLING
· Before the first using, wash all removable parts in warm soapy water, rinse thoroughly and dry. Wipe the housing with a
damp cloth.
· Never immerse motor body in any liquid or wash under running water.
· Place the motor unit on a level surface.
CAUTION: Do not operate continuously longer than 3 minutes with less than 1 minute intermission. (Grinder: 0,5
min / 3 min).
· Do not remove any parts during the operating.
BLENDER
· Fit the blender jar onto the motor unit and turn it counterclockwise to make the two parts integral (fig.1).
· Put ingredients into blender jar, and close it with the lid.
· Insert stopper into the lid and then put the lid onto the blender jug. Make sure all parts securely fitted.
· Plug-in, turn the switch/press buttons to recommended speed:
"1"(low speed) for liquid ingredients mainly.
"2" (high speed) for heavier processing, i.e. liquid and solid ingredients mixtures.
- PULSE mode.
· Blender could process fruit juices, ice-cocktail, etc.
CAUTIONS:
· Avoid operating the empty blender;
· Never place hot ingredients into blender jar (> 70 ºC);
· Ingredients must be cut into small pieces before processing in blender jar;
· Never fill blender jar with a liquid over maximum level marked;
· You may add extra ingredients from the top of the jar after taking off the insert;
· When processing is finished, switch off, and then unplug the appliance and wait the motor will stop before removing a
food and attachments.
GRINDER
· Load products to be processed in the bowl.
· Fit blade unit into the bowl.
· Do not forget to fix rubber collar onto blade unit.
· Screw cutting knife support (counterclockwise ) in the bowl/
· Fit the grinder unit onto the motor body and rotate it in counterclockwise direction.
· Preferably use the grinder in pulse mode.
CLEANING AND CARE
· Switch off and unplug the appliance.
· Wash the accessories immediately and avoid soaking them in water for long periods; wash in warm sudsy water after
each use. Dry all accessories with a clean soft cloth.
· Wipe housing with a damp cloth.
· Do not use scouring pads, abrasive and harsh detergents.
· DO NOT IMMERSE THE MOTOR UNIT IN ANY LIQUID OR IN A DISHWASHER.
CAUTION: The blades are extremely sharp and therefore dangerous. Handle with caution!
STORAGE
· Be sure that the appliance is unplugged.
· Complete all requirements of Chapter CLEANING AND CARE.
· Keep the appliance in a dry clean place.