Rockwell Automation 140U K-Frame CB Alarm Switch and Alarm /Auxiliary Switch Combination - Manual (Page 8)

c. Press PUSH-TO-TRIP button
-
contact open
contact
- closed.
d. If auxiliary switch fails test, make sure that
module is properly seated in trip unit slots. If
problem persists, contact Allen-Bradley.
2-1 8. Install circuit breaker
2-19. Connect accessory leads as required.
(See Fig. 2-12.)
Allen-Bradley assumes no responsibility for malfunc-
tioning accessories installed by the customer.
40752-035(1) Effective 3/02
Page 8