Barco LC-5621 - Manual (Page 11)

Barco - LC-5621 - User manual _______________________________________________________ 11
Installation
6 Installation
6.1 Mounting procedure
6.1.1 LC-5621 mounted on stands
The unit is standard mounted on two stands on the rear of the unit. The stands
use the VESA mounting holes foreseen in the unit.
The stands can be mounted on two ways as shown in the drawing below.
Figure 1: Location of the stands of the LC-5621
1 Stand (2x)
1 1
1 1
DVI-D (Master) DVI-D (Slave) RS232
AC IN ON OFF
MAIN POWER USB HUB
DVI-D (Master) DVI-D (Slave) RS232
C IN ON OFF
P USB HUB