Barco LC-5621 - Manual (Page 5)

Barco - LC-5621 - User manual ________________________________________________________ 5
Important notice
2 Important notice
2.1 Commercial In Confidence
The information contained herein is Barco confidential information. No part of
the information contained herein may be disclosed outside of the organization of
the recipient, its sub-contractors, and customers in any form or by any means
and/or stored in a database or retrieval system without the prior written consent
of Barco.
2.2 Notice
The technical specifications mentioned in this manual shall under no
circumstances be used as proof or item of evidence.
Only the technical specifications defined in the Barco technical
specifications document (which is not part of this manual) can be used
as a base for contract negotiations.
Note that the DVI-D connectors are not always used according to the standard
DVI-D regulations, carefully follow the instructions of this user manual in order
to make the proper connections.
2.3 Federal Communication Commission (FCC) notice
This equipment has been tested and found to comply with the limits of an FCC
class (refer to the technical specifications of the specific unit for more details
about the corresponding class). These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
2.4 Disposal information
WARNING
:
The fluorescent tubes inside the backlight of the LCD contain a small amount of mercury that is
considered hazardous to a person's health. Please follow local regulation or laws for disposal.
The LCD panel is composed of multiple layers of glass and protective glass with a small amount
of liquid in between. Rough handling or dropping can cause the LCD panel to break. If any part
of the skin or body comes in direct contact with the liquid, immediately wash the affected areas
with plenty of water for at least 15 minutes. If any symptoms are present after washing, get
medical care.