Rockwell Automation 160 Low Profile Drive - Manual (Page 2)

Maintain 12.5 mm (0.5 in.) clearance at the top, bottom, and front of drive. Provide a minimum
of 8.5 mm (0.33 in.) between units.
The 160-L requires grounding just as all 160s.
The fan bracket is wired to the load side ground terminal block. It is the User’s responsibility
to wire the system ground.
The ground terminal on the line side of the 160-L (top) can accept one or two 12 gage wires.
The ground terminal on the load side (bottom) of the 160-L can accept one 12 gage wire (due
to wire from fan bracket).
All dimensions are in millimeters and (inches), all weights are in kilograms and (pounds).
Drive Dimensions and Weights
200-240 VAC – 3-Phase
Drive H W D Weight
160-AA12L 172.2 (6.78) 80 (3.15) 140 (5.50) 0.84 (1.85)
380-460 VAC – 3-Phase
Drive H W D Weight
160-BA06L 172.2 (6.78) 80 (3.15) 140 (5.50) 0.84 (1.85)
59.9
(2.36)
172.2
(6.78) 151.6*
(5.97)
Fan
Ground
Wire
Fan
Ground
Wire
Fan
Wire
59.9*
(2.36)
80.0
(3.15)
139.7
(5.50)
76.2
(3.00)
59.9
(2.36)
51.8
(2.04)
* = Mounting Hole Dimensions
2 Mounting Holes
On Fan Bracket