Rockwell Automation 1394-FK10TS_FK22TS Fan Kit Installation Instructions - Manual (Page 2)

2 1394 Fan Kit
Publication 1394-IN067A-EN-P — January 2005
For additional 1394 installation, wiring, or system integration
information, refer to the following publications:
•
1394 Digital AC Multi-Axis Motion Control System User Manual
(publication 1394-5.0-MAY00).
•
1394 Digital AC Multi-Axis Motion Control System Document Update
(publication 1394-DU005x-EN-P).
To download this and other Rockwell Automation
®
publications, go to
www.rockwellautomation.com/literature.
Introduction
The 1394 fan kit is designed to provide additional cooling for the system
module. The fan is attached on top of the system module chassis
exterior and wired to 24V dc. You may need a volt meter and small
flathead screw driver to install the fan.
ATTENTION
To avoid shock hazard or personal injury, assure that
all power is removed from the system module before
proceeding. This system may have multiple sources of
power. More than one disconnect switch may be
required to de-energize the system.