Rockwell Automation 1336S_F_T_E_R Dynamic Brake or Chopper Connection - Manual (Page 5)

Dynamic Brake or Chopper Connection 5
Figure 4 DC Bus Inductor Style A Connection Points for Dynamic Brakes
(G Frame Drive shown, H Frame Drive similar)
Figure 5 DC Bus Inductor Style B Connection Points for Dynamic Brakes
(G Frame Drive shown, H Frame Drive similar)
To (+) DC
Brake/Chopper
Terminals
Upper Inductor
Stud is (+) DC Bus
(M10 Thread)
Lower Inductor Stud
is (–) DC Bus
(M10 Thread)
Wires Are Not Part Of Drive.
These Wires Added By Customer
When DB Is Used. Shown Here
For Added Clarity. (Stud Is M10 Thread)
To (–) DC
Brake/Chopper
Terminals
ab1001a
ab1000a
Upper Inductor Stud
is (+) DC Bus
(M10 Thread)
Lower Inductor Stud
is (–) DC Bus
(M10 Thread)
To (+) DC
Brake/Chopper
Terminals
To (–) DC
Brake/Chopper
Terminals
Wires Are Not Part Of Drive.
These Wires Added By Customer
When DB Is Used. Shown Here
For Added Clarity. (Stud Is M10 Thread)