Rockwell Automation 1492-CM800-LD011 Field Wire Conv. Module for Modicon B838-032 to 1756-OB32 - Manual (Page 3)

(3)
V. Fuse Installation and Replacement
The 1492-CM800-LD011 conversion module has two (2) mechanical fuse holders with fuses located on the circuit board
inside the modules plastic case. The following explains how to replace the fuses.
1) Remove the screw from the bottom of the conversion module plastic case.
2) Push UP and IN on the locking tab at the other end of the conversion module case.
3) Remove the top cover (part which has the nameplate label) from the module case.
10000021898 (Version 00)
Locking Tab
IN
UP