Rockwell Automation 1609-5000CCT Isolation Step-Down Transformer - Manual (Page 5)

Installation
3
Installation
Installing the Tower
Transformer • The transformer must be installed to the LEFT of the UPS when facing the FRONT of
the units.
• If your configuration includes the optional bypass panel, ensure that the bypass panel is
installed to the LEFT of the transformer when facing the FRONT of the units. Refer to
the bypass panel manual for installation instructions.
• The transformer and the UPS must be secured to one another using the provided tie
brackets.
1. Move the transformer to the installation site. Refer to the Unpacking section in this
manual.
2. Remove the covers on the transformer
Œ
and UPS
•
as shown.
3. Remove the 2 screws at the top and bottom of the transformer
Ž
.
•
Œ
Ž