Rockwell Automation 1326-CPC1T-L Special Application Cables - Manual (Page 4)

Publication 1326-IN030A-EN-P - May 2007 4 PN-13137
Supersedes Publication 1326A-IN030A-EN-P - May 2007 Copyright © 2007 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.
Cable Bend Radius The table and diagram depict the minimum bend radius for cables. Bend
radius is the tightest (minimum) curvature allowed without potential damage
to the cable.
Allen-Bradley, Rockwell Automation, and TechConnect are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are the property of their respective companies.
BR Bend Radius
Motor Power Cable Catalog Number 1326-CPB1T-EL-xxx 1326-CPC1T-EL-xxx
BR mm (in.)
(1) 104.1 (4.1) 160.2 (6.3)
(1) Bend radius (BR) is the specified minimum bend radius for cable assemblies. For standard cable, BR is a one-time flex application. BR
may vary on user-fabricated cables. Flex-rated cables have a much higher BR to withstand flex applications.