Rockwell Automation 1203-FM1 FLEX I/O SCANport Module - Manual

FLEX I/O is a trademark of AllenĆBradley Co. Inc.
SCANport is a trademark of Allen-Bradley Co. Inc.
FLEX I/Ot SCANportt Module
(Cat. No. 1203ĆFM1)
Installation Instructions
Channel 1
Channel 2
S
1
2
3
4
6
8
0
1
2
3
4
5
6
7
Module Installation
Important:
This module mounts on a special 1203 terminal base unit and should
not be used with any other flex base. You can remove and insert
modules under power. However, removal may cause the attached
SCANport device(s) to fault.
To mount this module, you need to: