Configure the connection – Rockwell Automation 1426-COMM-DNT PowerMonitor 5000 Unit Optional Communication Modules User Manual
Page 5
Advertising
Rockwell Automation Publication 1426-IN001A-EN-P - July 2012
PowerMonitor 5000 USB Driver Installation and Configuration 5
Configure the Connection
Follow these steps to configure the connection.
1. From the Windows desktop, choose Start > Settings > Network
Connections.
A new Local Area Connection with a Device Name ‘Remote NDIS based
Device’ was added when you installed the driver.
2. Right-click the connection name and choose Properties.
Advertising
This manual is related to the following products: