Rockwell Automation 1203-CN1 ControlNet Communications Module 1203-CN1 - Manual (Page 11)

Publication 1203-5.13 – February, 2002
Preface
Preface
Objectives Read this preface to become familiar with the rest of the manual. This
preface covers the following topics:
• Who should use this manual.
• An overview of the 1203-CN1 ControlNet™ communications
module.
• The purpose of this manual.
• Terms and abbreviations.
• Conventions used in this manual.
• Rockwell Automation support.
Who Should Use This Manual? Use this manual if you are responsible for installing, wiring,
programming, or troubleshooting control systems that use the
1203-CN1 ControlNet communications module.
This manual is intended for qualified service personnel responsible
for setting up and servicing the 1203-CN1 module. You must have
previous experience with and a basic understanding of electrical
terminology, programming procedures, required equipment, required
software, networking, and safety precautions.
What Is the 1203-CN1 ControlNet
Communications Module? The 1203-CN1 ControlNet communications module provides an
interface between a ControlNet network and a single SCANport™
product.
Purpose of this Manual This manual is a learning and reference guide for the 1203-CN1
ControlNet communications module. It describes the procedures
needed to install, configure, and troubleshoot the module. Before you
initialize, operate, or service the module, you should read this manual
in its entirety.